It will be installed on the shore power ground wire somewhere between the inlet receptacle to the breaker panel.
Dennis C. Touche' 35-1 #83 Mandeville, LA On Mon, Dec 28, 2015 at 7:50 PM, David Knecht via CnC-List < cnc-list@cnc-list.com> wrote: > I was on shore power for the C&C Rendesvous in Clinton, CT. I don’t think > I have a galvanic isolator. I have looked at the pictures and don’t think > I have seen anything like it. Where would it be installed? Dave > > On Dec 28, 2015, at 9:12 AM, Della Barba, Joe via CnC-List < > cnc-list@cnc-list.com> wrote: > > Did you spend ANY time on shorepower? > > If you don’t have a galvanic isolator, you are at the mercy of the > maintenance practices of everyone on the pier. Why buy zincs when you can > use everyone else’s? > > Joe DB > > Coquina > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com > <cnc-list-boun...@cnc-list.com>] *On Behalf Of *phorvati . via CnC-List > *Sent:* Sunday, December 27, 2015 9:43 AM > *To:* cnc-list@cnc-list.com > *Cc:* phorvati . > *Subject:* Re: Stus-List Zinc decay > > > > Sometimes its nothing you did. My theory is that besides changing > galvanic properties of underwater metals, like prop, nut, shaft shark, at a > worst case boat wiring deteriorates over time. This could result in more > stray current. Current not going back to negative of the bank, but instead > leaving via prop shaft and your zinc. Obviously very small amount, but > enough over a season to notice deeper deterioration. > > On Dec 24, 2015 11:48 AM, "David Knecht via CnC-List" < > cnc-list@cnc-list.com> wrote: > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > > Aries > 1990 C&C 34+ > New London, CT > > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the > bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > > >
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com