Charlie, check out here for an example of a past project using nidacore - just to get you thinking of some possibilities for DIY composites. A past project restoring a Lotus Europa. You could make a tabletop/bracketry in a similar way.
http://www.syer.net/firewall.htm Dave Message: 10 Date: Fri, 1 Jan 2016 15:28:52 -0500 From: cenel...@aol.com To: cnc-list@cnc-list.com Subject: Message-ID: <151fee0ebf8-30a3-14...@webprd-a67.mail.aol.com> Content-Type: text/plain; charset="utf-8" My 36 XL/kcb was delivered with a relatively massive table bolted to the the cabin sole which had 2 fold down leaves. This table sort of wrapped around the bast so that when the leaves opened, the table surface was centered fore and aft and athwartships so that 4+ people could sit around it although getting our from the curved port settee was difficult. To have any room for racing crew, I removed it years ago since I don't really cruise with the boat. I would like to build or buy a lightweight table that could be mast mounted (preferred) or bulkhead mounted (probably too short in this case) and fold up out of the way when not used. It would be nice to also have folding leaves. It might also be made to be pulled up to the underside of the coach roof while being constrained by the mast when not in use and locked to the cabin cole when in use. I would like it to be relatively light weight in either case. Any photos or ideas from the list on a similar table or a design for one? Charlie Nelson Water Phantom C&C 36 XL/kcb
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
