I tried making something similar out of G10 and long bolts. Problem was the difference between the inside and outside dimension was either1/4 or 3/8 inch, so I could not get a collar. That would press out the old bearing. My mechanic pulled the tranny and slipped the shaft forward (I had removed the prop).
Joel 35/3 Annapolis On Monday, February 22, 2016, Danny Haughey via CnC-List < cnc-list@cnc-list.com> wrote: > Sorry for not changing the subject... > > ---------- Original Message ---------- > From: Danny Haughey via CnC-List <cnc-list@cnc-list.com > <javascript:_e(%7B%7D,'cvml','cnc-list@cnc-list.com');>> > To: cnc-list@cnc-list.com > <javascript:_e(%7B%7D,'cvml','cnc-list@cnc-list.com');> > Cc: Danny Haughey <djhaug...@juno.com > <javascript:_e(%7B%7D,'cvml','djhaug...@juno.com');>> > Subject: Re: Stus-List CnC-List Digest, Vol 121, Issue 69 > Date: Mon, 22 Feb 2016 20:32:30 GMT > > here is an interesting group of pictures of a homemade solution of what > you're looking for. > > > http://www.shamrockboatownersclub.com/forums/showthread.php?13492-Line-cutter-installation-cutless-cutlass-puller&s=03d15f81d3d8790bc364ab5cf8f81f8a > > ---------- Original Message ---------- > From: Brian Fry via CnC-List <cnc-list@cnc-list.com > <javascript:_e(%7B%7D,'cvml','cnc-list@cnc-list.com');>> > To: cnc-list@cnc-list.com > <javascript:_e(%7B%7D,'cvml','cnc-list@cnc-list.com');> > Cc: Brian Fry <biker...@yahoo.com > <javascript:_e(%7B%7D,'cvml','biker...@yahoo.com');>> > Subject: Re: Stus-List CnC-List Digest, Vol 121, Issue 69 > Date: Mon, 22 Feb 2016 14:43:21 -0500 > > Does anyone have a cutlass bearing removal tool I could borrow? > The yard won't let me borrow theirs. > I'd rather press it out than cut it out, to get an accurate measurement. > > > > > >> Message: 4 >> Date: Sun, 21 Feb 2016 22:24:49 +0000 (UTC) >> From: Chuck S <cscheaf...@comcast.net >> <javascript:_e(%7B%7D,'cvml','cscheaf...@comcast.net');>> >> To: "CNC boat owners, cnc-list" <cnc-list@cnc-list.com >> <javascript:_e(%7B%7D,'cvml','cnc-list@cnc-list.com');>> >> Subject: Re: Stus-List Cutlass bearing again. >> Message-ID: >> <842745367.1105317.1456093489165.javamail.zim...@comcast.net >> <javascript:_e(%7B%7D,'cvml','842745367.1105317.1456093489165.javamail.zim...@comcast.net');> >> > >> Content-Type: text/plain; charset="utf-8" >> >> I would remove the cutless bearing from the strut and take more >> measurements. The outer dimension may be different once you get it out. >> Maybe there is a sleeve in there? Once it's out, you can take it to a shop >> and say, "give me one of these." >> >> Chuck >> Resolute >> 1990 C&C 34R >> Broad Creek, Magothy River, Md > > > > -- > Brian Fry > S/V La Neige > 1993 C&C 37/40XL > HdG Maryland > -- Joel 301 541 8551
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com