Hi Jim,
I might be doing a pole mount this year too.
Can you double check the pole diameter? It looks to maybe scale as a
2" comparing to nearby stanchion in the pics.
Cheers, Russ
Sweet 35 mk-1
At 09:41 PM 23/02/2016, you wrote:
I built a pole mount on our 35-3 that is pretty simple. I got the
stainless plate sheared to size and had it welded onto the pole.
It's all handrail fittings and 1" SS tube. I made the tube clamp
from some 1" black Starboard scraps, bought a Seadog anchor stopper
for the base. Including the radar, I spent less than $700. I added
another brace to the coaming after I took these pix just for a
little more stability.
<https://lh3.googleusercontent.com/-eZodRniJGz0/VZcvHSR3VpI/AAAAAAAADNw/wXPsxk5waLI/s720-Ic42/pole.jpg>https://lh3.googleusercontent.com/-eZodRniJGz0/VZcvHSR3VpI/AAAAAAAADNw/wXPsxk5waLI/s720-Ic42/pole.jpg
https://lh3.googleusercontent.com/-FF5A-_Ahhco/VZc7HaE1ZLI/AAAAAAAADOA/rQPkzOM__Dg/s720-Ic42/base.jpg
Jim Watts
Paradigm Shift
C&C 35 Mk III
Victoria, BC
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com