You could look at Castrol Braycote 601. It is a perflouoronated grease
taht we used in missile controls. It is basically an inert grease that
should be compatible with the plastics. Only downside is that it is
about a $100 an ounce.
Neil Schiller
1970 Redwing 35, Hull #7
(C&C 35, Mark I)
"Corsair"
Yes, I am a rocket scientist
On 3/12/2016 8:39 PM, David Knecht via CnC-List wrote:
I have brought all my winches home and cleaned them and getting set to
regrease them. Most of the larger bearings are cylindrical units with
plastic rollers. I bought some Harken winch grease today and it
specifically says it is not intended for plastic rollers and to use an
oil instead. The bearings certainly had been greased by whomever last
worked on them. What are the groups thoughts on this? Thanks- Dave
Aries
1990 C&C 34+
New London, CT
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
_______________________________________________
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
