Hi All sections of new cabin sole are cut out and fitted and now the coating is in progress. I have two coats of West 105/207 on the finished side of the teak and holly as well as underneath and on edges. Following epoxy I am planning a number of coats of Epifanes varnish on the finished side only.
A couple of questions. 1. After sanding epoxy and prior to initial coat of varnish what should be used to wipe down the surface? Acetone? 2. After sanding each coat of varnish what is used to wipe down the varnish prior to applying next coat? Some sort of paint thinner or something else? I have Interlux 202 Solvent wash, paint thinner, Interlux special thinner 216 and acetone on hand as well as a Canadian Tire and a Chandlery on my drive home 3. How many coats of epoxy prior to first coat of varnish? (finish surface) 4. How many coats of varnish over the epoxy? (finish surface) Thanks Mike Persistence 1987 Frers 22 #16 Halifax, NS http://users.eastlink.ca/~mhoyt
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
