seems to be a fuel isue. wate is pumping fin. when outside temps aRe cold usually one cglider fires first and then i gI've hrottle and seconomics cylinder fires up.
today it seemed this would be same procedure. first cylinder seemed to catch and then I gave throttle but second never caught. then when I stopped pressing starter it died. this ocured several times. now there is no firing at all. cranks over fine and water pumps but does not catch. seems a fuel issue will be tomorrow's problem From: CnC-List [cnc-list-boun...@cnc-list.com] on behalf of Bill Connon via CnC-List [cnc-list@cnc-list.com] Sent: April 9, 2016 2:50 PM To: cnc-list@cnc-list.com Cc: Bill Connon Subject: Re: Stus-List 3gm30f airlock Hoyt, Mike via CnC-List wrote: > any suggestions on how to work around this? > > started and ran yesterday. no luck today > _______________________________________________ > > This list is supported by the generous donations of our members. If you like > what we do, please help us pay for our costs by donating. All Contributions > are greatly appreciated! > Mike, If you mean that your seawater pump is not pushing any water out the exhaust you could undo the outlet from the filter, insert a funnel in the hose and pour priming water down the funnel until the pump is primed. If the engine does not start and the pump does not prime you have to be careful not to fill your cylinders with water. Been there - done that! Bill Caprice 1 _______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
