No, on my Landfall 38, they were just screws through the exterior skin--they don't come into the cabin!
Bob Bob Boyer S/V Rainy Days (1983 C&C Landfall 38 - hull #230) Blog: dainyr...@blogspot.com Email: dainyr...@icloud.com Annapolis, MD (presently in Baltimore) > On Apr 19, 2016, at 2:39 PM, Tim Sippel via CnC-List <cnc-list@cnc-list.com> > wrote: > > It sounds like there should be some round white “plugs” on your cabin > headliner (ceiling?) , pop these out and the “nuts should be there . > > Tim > > C&C 33mkii MATICO > > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Randy > Stafford via CnC-List > Sent: Tuesday, April 19, 2016 2:22 PM > To: cnc-list > Cc: randy.staff...@comcast.net > Subject: Stus-List Removing Cabin-Top Handrails > > Listers- > > My next project is to refinish and re-bed the teak hand rails on the cabin > top of my boat. Any tips on how to remove them? I believe there are screws > covered by bungs from the interior hand rails to the exterior hand rails aft > of the bulkhead separating the salon from the head. But how are the exterior > handrails fastened forward of that bulkhead? (the exterior hand rails extend > farther forward than the interior ones). > > I need to remove them in order to re-bed them, as I've got a leak from the > port aft screw hole onto my ice box lid and galley countertop around it, > causing delamination of the plywood countertop at the ice box lid cutout. > > My plan is to strip them (if necessary), sand them, and just oil them with > teak oil, following instructions from Don Casey. If you think a sealer or > varnish would be better, I'd be interested in hearing your opinion. > > Also, inspired by Dennis's pictures from Touche, I've posted a few pictures > of my boat at https://drive.google.com/open?id=0B-NqAxQ6JxFTaUlpUkZJWGt5RVk. > So far the only projects I've done are cosmetic stuff on the hull exterior: > lots of topsides buffing and waxing, putting on my own transom decals, > sanding and repainting the boot stripe, and spot-sanding and re-coating the > bottom with VC-17 (plus adding a combination spare tire / carrier wheel to > the trailer). > > I'd like to thank you all again for making this list such an outstanding > resource. I'm very grateful to be able to communicate with you all. And > special shout-out to Stu Murray for making all this possible - I just ordered > five quantity of "Photo Album Support" from the C&C Photo Album Online > Chandlery in appreciation. > > Cheers, > Randy > > > > > This communication is confidential. We only send and receive email on the > basis of the terms set out at www.rogers.com/web/content/emailnotice > > > > Ce message est confidentiel. Notre transmission et réception de courriels se > fait strictement suivant les modalités énoncées dans l’avis publié à > www.rogers.com/aviscourriel > _______________________________________________ > > This list is supported by the generous donations of our members. If you like > what we do, please help us pay for our costs by donating. All Contributions > are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
