Now that my phone is completely overloaded with list emails, how do I go about getting rid of them all and changing it to the setting so I only get my mails plus a daily compilation ? Thanks On Apr 25, 2016 08:36, "Steve Thomas via CnC-List" <cnc-list@cnc-list.com> wrote:
I chose to replace the packing box on my C&C36 with a new Buck Algonquin conventional packing after 2 catastrophic failures of drip less packing glands in boats at my marina in a single month. One sank, and the other made it to the travel lift in time. Both power boats. I admit that I know little about the PSS product, but after witnessing that, I didn't even consider one of them. I concluded that the conventional system was a safer bet for me. I don't know what happens when they go wrong, but they have some sort of failure mode that suddenly lets in an awful lot of water. Steve Thomas C&C36 Merritt Island, FL ---- Patrick Davin via CnC-List <cnc-list@cnc-list.com> wrote: Thanks, it's definitely sounding like the way to go. I'm just extra cautious when it comes to something enclosing a big hole in the boat. And I like simple systems, and the PSS is definitely more complex than a traditional stuffing box. But it sounds like PYI's 6 year recommendation is just them being extra conservative. Part of my worry about installing a more complex shaft seal arose from a local PNW blog report I read last year: http://www.riveted-blog.com/2015/08/excitement-at-sea.html http://www.riveted-blog.com/2015/08/hauling-out-in-juneau.html They suspected their PSS shaft seal of overheating. But they're a motor boat (so faster speeds), and in the end (in the 2nd post) they found the issue might have actually been an engine misalignment. I see Martin actually commented on the 1st one, about needing to burp the seal sometimes. If that's the only complication I need to know, then I'm happy with that. -Patrick On Sun, Apr 24, 2016 at 1:49 PM, <cnc-list-requ...@cnc-list.com> wrote: > > ---------- Forwarded message ---------- > From: Robert Boyer <dainyr...@icloud.com> > To: cnc-list@cnc-list.com > Cc: Patrick Davin <jda...@gmail.com> > Date: Sun, 24 Apr 2016 14:42:39 -0400 > Subject: Re: Stus-List Stuffing box options on LF38 > I've used a PSS shaft seal on my boat for the last 20 years and I'd never > go back to a packing gland. I changed mine out at the 10 year point and it > looked like it had plenty of life left at that time. Don't overthink this! > > Bob > > Bob Boyer > S/V Rainy Days (1983 C&C Landfall 38 - Hull #230) > Blog: dainyrays.blogspot.com > Email: dainyr...@icloud.com > Annapolis, MD (presently in Baltimore) _______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!