Great. Thanks a lot. I bought one today. Mark McMenamy C&C 25 "Icicle" Fort Pierce FL
> On May 16, 2016, at 9:28 AM, Bmue via CnC-List <cnc-list@cnc-list.com> wrote: > > Hi mark, > We put a garelick motor mount on. Makes lifting the outboard a breeze. > Sometimes it can be a bit difficult to get it in the lowest position. But > would definitely recommend. > Installed with an aluminium backing plate . > http://www.marineoutfitters.ca/mobile/?page=shop&category=10025%7C11386%7C11388&product=37208895. > Make sure you take the weight of the motor into account when determining > installation height of the mount. > > Bettina > C&C 25 Savannah > >> On May 15, 2016, at 21:26, Mark McMenamy via CnC-List >> <cnc-list@cnc-list.com> wrote: >> >> Hello all, >> >> I've figured out that my outboard motor bracket is a Garlick model rated for >> two stroke models rated at 85 lbs. The previous owner put on a four stroke >> at 120 lbs so I need to replace the bracket. Has anyone done this? My >> transom is reinforced with an aluminum sheet and is very sturdy so that's >> taken care of. I was thinking if going to a Garlick model that is rated >> for four strokes. There are two models and I was thinking of buying the >> heavier duty of the two that gives 15" of travel. I was also thinking of >> just putting a fixed mount on the back as I only use the electric trim to >> tilt the motor up. Any opinions on this idea? Any advice is greatly >> appreciated. >> >> Thanks! >> >> Mark McMenamy >> C&C 25 "Icicle" >> Fort Pierce FL >> _______________________________________________ >> >> This list is supported by the generous donations of our members. If you like >> what we do, please help us pay for our costs by donating. All Contributions >> are greatly appreciated! > > _______________________________________________ > > This list is supported by the generous donations of our members. If you like > what we do, please help us pay for our costs by donating. All Contributions > are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
