John, I've refinished several pieces of my cabin sole by removing them and doing it in my workshop. Removal is easy. It allowed me to clean and seal the edges and the underside. I also was able to repair places where the teak edging tape had broken off. It was well worth the minimal extra effort.
Just my two cents. Ron -----Original Message----- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of John Pennie via CnC-List Sent: Tuesday, May 31, 2016 12:36 PM To: cnc-list@cnc-list.com Cc: John Pennie Subject: Stus-List Stripping Cabin Sole Has anyone used a water based paint stripper to remove varnish from the cabin sole? I’m going to have to refinish them in place so I’m concerned about any stripper that might seep through and end up in the bilge. Lots of plastic stuff down there that may not react too well. John _______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated! _______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
