Mike, yes, I swapped from a Martec (non-geared) to a flex-o-fold about 6 years ago on Mojito (35-3). There was a dramatic difference in reverse capabilities.
> On Jun 7, 2016, at 9:41 AM, Hoyt, Mike via CnC-List <cnc-list@cnc-list.com> > wrote: > > On Persistence we currently have a Martec RH 16 DX 14P 2 blade elliptical > folding propeller that is approximately 10 years old on our Yanmar 3GM30F. I > back in to my slip because when I am motoring in reverse I can stop very > quickly by putting in fwd. If driving forward into a slip I cannot stop > quickly by putting into reverse. My normal procedure is to approach our > marina at approx. 4 knots, then put in neutral for a bit and at 3 knots put > in reverse and increase RPMs to 2800. During this time I turn bow away from > marina for approx. 30 seconds until the boat stops its forward momentum and > then begins to move in reverse. After that it drives very nicely in reverse > and I back all the way in til I get to my slip and am stopped. > > Suffice it to say there is very little bite when engaging reverse. > > Has anyone here recently switched from Martec folding to Flexofold geared > prop who can offer any comments on the difference in reverse? Is it > significant and therefore worthwhile paying the $1200 US price I have been > quoted? > > Thanks > > Mike > Persistence > 1987 Frers 33 #16 > Halifax, NS > _______________________________________________ > > This list is supported by the generous donations of our members. If you like > what we do, please help us pay for our costs by donating. All Contributions > are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!