Mike, The 3 blades Flexofold, 15" / 11" was 1 520 US $ two years ago, including the 50$ freight charge. Plus the
It replaced an original Martec fixed blades that was 16" / 10" pitch. Envoyé de mon iPad > Le 7 juin 2016 à 08:21, Hoyt, Mike via CnC-List <cnc-list@cnc-list.com> a > écrit : > > Bruno > > What did they charge you for that prop? > > Mike > > From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bruno > Lachance via CnC-List > Sent: Monday, June 06, 2016 7:00 PM > To: cnc-list@cnc-list.com > Cc: Bruno Lachance > Subject: Re: Stus-List Propeller > > Robin, > > I do remember the original fixed blades prop of my 33 mk II with original > Yanmar 2gmf was 16", will have to check for the pitch but I think it is 12. I > will be back home in two days to verify that. > > I ordered a Flexofold 3 blades and they recommended 15" /9". The blade area > is larger and I think it is too much prop for my boat, I can't push the > engine over 2800. But it is a good prop and I deal with it. > > Bruno lachance > Becassine, 33 mkIi > New Richmond, Qc > > > Envoyé de mon iPad > > Le 5 juin 2016 à 22:29, Robin Drew via CnC-List <cnc-list@cnc-list.com> a > écrit : > > Thanks. I just bought the boat and I'm pretty annoyed but sure the problem is > that it's worn and needs maintenance. I'm planning on removing it and > putting a simple 2 blade prop on, at least for now. > > It's hard to get info about the size and pitch specs. However, I found a > website in BC that has a prop calculator and it gave me 15" with 9" pitch for > my boat (CNC 33/2), engine and transmission. Does this sound right? > > Any comments? > Robin Drew > Mobile: +1 514 4632060 > > > Steve Thomas > C&C27 MKIII > Port Stanley, ON > ----- Original Message ----- > From: Robin Drew via CnC-List > To: cnc-list@cnc-list.com > Cc: Robin Drew > Sent: Saturday, May 28, 2016 17:26 > Subject: Stus-List Propeller > > I have just purchased a C&C 33 mark 2 with a 2GMF engine. It has a > clamshell-type folding propeller that, once in gear, is causing significant > vibration above idle speed. What could be causing this? > > Robin Drew > Mobile: +1 514 4632060 > "The only thing we have to fear is fear itself" - FDR > _______________________________________________ > > This list is supported by the generous donations of our members. If you like > what we do, please help us pay for our costs by donating. All Contributions > are greatly appreciated! > _______________________________________________ > > This list is supported by the generous donations of our members. If you like > what we do, please help us pay for our costs by donating. All Contributions > are greatly appreciated! > _______________________________________________ > > This list is supported by the generous donations of our members. If you like > what we do, please help us pay for our costs by donating. All Contributions > are greatly appreciated! > _______________________________________________ > > This list is supported by the generous donations of our members. If you like > what we do, please help us pay for our costs by donating. All Contributions > are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
