What thickness plexiglass did you use? The Plexiglas G spec. sheet shows 6mm (.236") then 9mm (.354") as the next step up. I'm getting ready to do this and am wondering "How thick?"
Cheers, Al > On Jun 30, 2016, at 8:29 AM, Jim Watts via CnC-List <cnc-list@cnc-list.com> > wrote: > > Make sure you get cast acrylic, not extruded. The guy who cut my last windows > for me cheaped out and I think used extruded. Now I'm going to have to change > them out again in a year or two. > > Jim Watts > Paradigm Shift > C&C 35 Mk III > Victoria, BC > >> On 29 June 2016 at 12:10, Jerome Tauber via CnC-List <cnc-list@cnc-list.com> >> wrote: >> I replaced the windows on my 29-2. Had the tinted acrylic laser cut and >> beveled. Much discussion of glue but the trick I used was running a jib >> sheet from the port to starboard through the cars and onto each winch >> pressing a 2x4 across the windows and tightening with winch. Jerry >> >> Sent from my iPhone >> >>> On Jun 29, 2016, at 2:24 PM, johnr via CnC-List <cnc-list@cnc-list.com> >>> wrote: >>> >>> Good discussions on this site re how to do this. I believe someone posted >>> a site for access to the window material, not the setting and sealing >>> material and I though I had saved it, but do not find. >>> >>> Where did those of you who have replaced windows obtained the window >>> material and did you cut and shape it yourself or how did you have it done? >>> >>> Thanks, >>> >>> John McLaughlin >>> Falcon >>> _______________________________________________ >>> >>> This list is supported by the generous donations of our members. If you >>> like what we do, please help us pay for our costs by donating. All >>> Contributions are greatly appreciated! >> >> _______________________________________________ >> >> This list is supported by the generous donations of our members. If you like >> what we do, please help us pay for our costs by donating. All Contributions >> are greatly appreciated! > > _______________________________________________ > > This list is supported by the generous donations of our members. If you like > what we do, please help us pay for our costs by donating. All Contributions > are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
