Replace it with a flex tank. I love my flex tanks. I don't have a single rigid tank on Touche'.
For some reason, flex tanks don't have a strong following. However, in being a member of this list for a decade and a half, I do not remember a single post about a failure of a flex tank. There have been several about rigid tanks. Dennis C. Touche' 35-1 #83 Mandeville, LA On Thu, Jul 7, 2016 at 4:56 PM, kelly petew via CnC-List < cnc-list@cnc-list.com> wrote: > One of my water tanks continues to leak and it appears to be where the > barbed elbow fitting exits the tank . I've wrapped the threads with Teflon > tape [both pink and white], but it fails to make a good seal. This is my > 3rd attempt to fix it. > The tank is a Kracor brand, and the tank's walls and bottom appear to be > quite thick. I have observed "weeping" only right around the hole where > the elbow fitting is screwed into it. > > Does anyone have a suggestion? Is there some adhesive that I can apply > the threads of the barbed fitting?? > > Thanks, > > Pete W. > > Siren Song > C&C 30-2 > Deltaville, VA. > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > like what we do, please help us pay for our costs by donating. All > Contributions are greatly appreciated! > >
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
