oh good god i just had a flashback! I feel your pain Edd
John > On Jul 11, 2016, at 12:37 PM, Edd Schillay via CnC-List > <cnc-list@cnc-list.com> wrote: > > Fred, > > It was corroded wire that was the initial problem. Plenty of voltage there > now. And yes, a very old drive. I may need to send it to Canada for > repair/refurb, but wanted to see if any suggestions hit before I disconnect > the hoses and wires. > > One thing is for sure - I’m getting tired of being in this position: > http://2.bp.blogspot.com/-t84cI65qdtE/TaxAHhoNrgI/AAAAAAAABdY/74WdK5ON_Rc/s1600/photo.JPG > > <http://2.bp.blogspot.com/-t84cI65qdtE/TaxAHhoNrgI/AAAAAAAABdY/74WdK5ON_Rc/s1600/photo.JPG> > > All the best, > > Edd > > > Edd M. Schillay > Starship Enterprise > C&C 37+ | Sail No: NCC-1701-B > City Island, NY > Starship Enterprise's Captain's Log <http://enterpriseb.blogspot.com/> > > > > >> On Jul 11, 2016, at 12:29 PM, Frederick G Street via CnC-List >> <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>> wrote: >> >> Edd — the Octopus drives only have about eight moving parts, so there’s not >> a lot that can fail on them. This is an older Octopus drive, right? Maybe >> it would be worth sending it to them for diagnosis and possible >> repair/refurb. Also, have you checked voltage at the solenoid and drive >> leads while connected to the drive? Maybe you have some corroded wire >> somewhere that’s causing a voltage drop. You need to have good sized wire >> for the drive; not so large is needed for the solenoid. I think we covered >> that in an earlier email off-list. >> >> — Fred >> >> Fred Street -- Minneapolis >> S/V Oceanis (1979 C&C Landfall 38) -- Bayfield, WI >> >>> On Jul 11, 2016, at 10:48 AM, Edd Schillay via CnC-List >>> <cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>> wrote: >>> >>> Listers, >>> >>> Thanks to the advice here and from Gary at Octopus, I did some testing. I >>> was able to get the solenoid on the Octopus drive to click on and off, and >>> the autopilot did get the motor on the drive going (I could hear it.) >>> >>> But, the wheel did not move. I added some hydraulic oil, but still no joy. >>> Maybe the system needs to be bleeded? I also did the test in very rough >>> conditions at the mooring, even though the instructions say it should be >>> dockside. I’m close. I can feel it. >>> >>> Any suggestions appreciated. >>> >>> All the best, >>> >>> Edd >>> >>> >>> Edd M. Schillay >>> Starship Enterprise >>> C&C 37+ | Sail No: NCC-1701-B >>> City Island, NY >>> Starship Enterprise's Captain's Log <http://enterpriseb.blogspot.com/> >> _ > _______________________________________________ > > This list is supported by the generous donations of our members. If you like > what we do, please help us pay for our costs by donating. All Contributions > are greatly appreciated!
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
