I would use a terminal block, not a plug. http://www.defender.com/product3.jsp?path=-1|328|2289986|2289993&id=51890
Joel On Fri, Jul 29, 2016 at 10:27 AM, Mark McMenamy via CnC-List < cnc-list@cnc-list.com> wrote: > Hello Everyone, > > A while back I posted I was having trouble with my anchor light flickering > and going out. I traced the problem to the outlet at the base of the > mast. It's just a smidge too loose to make good contact all the time. > There is a split on each prong of the plug which I have made bigger in > order to get better contact, but the connection still fails unless I push > the plug to one side or the other. Before I pull the outlet and replace > it, I wondered if anyone had any ideas? I've also cleaned the outlet as > best as I could. There was some corrosion, but it's gone now. > > As always, thanks a lot. > > Mark McMenamy > C&C 25 "Icicle" > Fort Pierce FL > _______________________________________________ > > This list is supported by the generous donations of our members. If you > like what we do, please help us pay for our costs by donating. All > Contributions are greatly appreciated! > -- Joel 301 541 8551
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!
