I took SS helicoils, screwed them onto Vaseline coated 10-24 SS screws, coated
them and the enlarged holes with thickened epoxy, and set them in the holes.
Then unscrew the screw when set, works great.
Bill Coleman C&C 39
-------- Original message --------
From: RAYMOND SHIBE via CnC-List <cnc-list@cnc-list.com>
Date: 7/28/16 5:13 PM (GMT-05:00)
To: cnc-list@cnc-list.com
Cc: RAYMOND SHIBE <rsh...@optonline.net>
Subject: Re: Stus-List Cabin sole screws
McMaster & Carr "T" nuts used by Wally Bryant.Ray Shibe
On Thu, Jul 28, 2016 at 03:42 PM, Brian Fry via CnC-List wrote:
Does anyone have a fool proof or inventive fix for deck plate screw holes that
won't hold any longer?Only about half of my screws hold. The fiberglass holes I
guess are just stripped from multiple times being screwed and unscrewed.
How about the boards under the seats? I know I can just drill out the holes and
epoxy in some dowels, but has anyone done anything with latches for these? My
group 31 battery boxes are so large as to cause me to lift up the whole board,
not just the access board. Some sort of latch system would make this much
easier.
--
Brian FryS/V La Neige1993 C&C 37/40XLHdG Maryland
_______________________________________________
This list is supported by the generous donations of our members. If you like
what we do, please help us pay for our costs by donating. All Contributions are
greatly appreciated!
_______________________________________________
This list is supported by the generous donations of our members. If you like
what we do, please help us pay for our costs by donating. All Contributions are
greatly appreciated!
