Brandon If you do not know what paint was used previously it is strongly recommended that you prime. You do not know what if any reaction may take place between the old and new paint
Mike From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Brandon Gaspard via CnC-List Sent: Tuesday, August 23, 2016 1:09 PM To: cnc-list@cnc-list.com Cc: Brandon Gaspard Subject: Stus-List Anyone use Pettit Easypoxy (EZ-Poxy one part) to paint topsides? I'm painting my hull with a one part topside paint and I decided on EZ Poxy by Pettit. I've heard better things about Pettit's one part than Interlux's Brightside. Awlgrip is much more expensive and supposedly much more difficult to work with. I'm painting a C&C 35 Mk1 in the sweltering Louisiana summer heat. Any tips on using EZ Poxy? The plan is a good pressure washing, followed by Bio Blue Hull, orbital sand with ~200 grit, acetone clean, paint (brush and tip), sand with 300 grit, wipe down, then apply a second coat. Boot strip and details will be done with Pettit Boot Top. I don't plan on priming because Tango's original gel coat has already been painted over. The paint job is holding up and looks to be in decent enough shape to paint over. Any tips or suggestions? Brandon C&C 35 Mk1
_______________________________________________ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our costs by donating. All Contributions are greatly appreciated!