3M makes these great scrubbing/sanding disks that work well for cleaning up the gasket surfaces. You can also check the flatness of the head and block. The head bolt holes should also be chased carefully with a tap.
Josh Muckley S/V Sea Hawk 1989 C&C 37+ Solomons, MD On Nov 19, 2016 4:28 PM, "David via CnC-List" <cnc-list@cnc-list.com> wrote: > So the head is off the boat (big thanks to fellow lister and Boat Yard > Buddy Danny) and in the basement awaiting delivery for the re-build. > > > What beside vacuuming out the cylinders (of the head's bolts dust) should > I be doing to the top of the block? Sand it while protecting the > cylinders? Anything to the cylinders themselves? > > > Thanks in advance > > > David F. Risch > 1181 40-2 > (401) 419-4650 (cell) > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > >
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!