Tom,

About 5 years ago I had to reposition my strut because the engine and prop 
shaft were not aligned.
Turns out that they were never in alignment.  I had to reposition the engine by 
making new engine mount brackets.  But that is another story.
I removed the strut and did all of the prep work.  The yard positioned and 
installed the strut.  I bedded it in the hull and finished the job.
It took about 4 days from start to finish.
The job is not difficult and I wish that I would have done the work I paid the 
yard to do.  I found all four bolts that hold the strut to the hull leaking 
water four years later.

Good luck,

Frank
C&C 38LF, S/N: 001
Rose City YC
Portland, Oregon



From: Tom Alessi via CnC-List 
Sent: Monday, November 21, 2016 12:57 PM
To: cnc-list@cnc-list.com 
Cc: Tom Alessi 
Subject: Stus-List Fw: Strut


Hey,
Recently wrapped a line around my prop/shaft and found some damage and a loose 
prop strut when the boat was hauled.
Has anyone done this repair and have any advice.
Thx

Tom Alessi
C&C 36
Rockaway Beach, NY



--------------------------------------------------------------------------------
_______________________________________________

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!











CONFIDENTIALITY NOTICE: This electronic mail transmission and any accompanying 
attachments contain information belonging to the sender which may be 
confidential and legally privileged. This information is intended only for the 
use of the individual or entity to whom this electronic mail transmission was 
sent as indicated above. If you are not the intended recipient, any disclosure, 
copying, distribution, or action taken in reliance on the contents of the 
information contained in this transmission is strictly prohibited. If you have 
received this transmission in error, please notify the sender immediately and 
destroy all copies of this transmission and all attachments. Thank you. 
_______________________________________________

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

Reply via email to