Thanks Josh Allen
On Tue, Nov 29, 2016 at 10:07 PM, Josh Muckley via CnC-List < cnc-list@cnc-list.com> wrote: > Oh yeah I forgot. That pitting/flaking corrosion around fasteners is > galvanic corrosion that occurs between the stainless steel fastener and the > aluminum. After the corrosion is removed and repainted, use tef-gel to > help minimize moisture intrusion and prevent more corrosion. > > Josh > > On Nov 29, 2016 6:19 AM, "Allen Miles via CnC-List" <cnc-list@cnc-list.com> > wrote: > >> I just ordered a solid vang and noticed corrosion on the tabs on the boom >> and at the base of the mast where the vang will be attached. What's the >> best way to resurface the tabs before mounting the vang? >> >> >> Allen Miles >> S/V Septima 30-2 >> Hampton, VA >> >> _______________________________________________ >> >> This list is supported by the generous donations of our members. If you >> wish to make a contribution to offset our costs, please go to: >> https://www.paypal.me/stumurray >> >> All Contributions are greatly appreciated! >> >> > _______________________________________________ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > >
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!