Just make sure they use a correct marine aluminum alloy.
Bill Bina
On 2/12/2017 9:30 AM, T power via CnC-List wrote:
I never thought about that, seems like a simple solution.
Sent from Outlook <http://aka.ms/weboutlook>
------------------------------------------------------------------------
*From:* CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Dennis
C. via CnC-List <cnc-list@cnc-list.com>
*Sent:* Saturday, February 11, 2017 8:45:54 PM
*To:* cnc-list@cnc-list.com
*Cc:* Dennis C.
*Subject:* Re: Stus-List Deteriorated mast step
I just had a sheet metal shop weld some aluminum angle together to
roughly duplicate the one on my 35-1. Probably similar to what C&C did
originally. You can see pics here:
https://drive.google.com/folderview?id=0B_sb5TfIENvsb3phTUV4S3lkQ00
Dennis C.
Touche' 35-1 #83
Mandeville, LA
O
_______________________________________________
This list is supported by the generous donations of our members. If you wish to
make a contribution to offset our costs, please go to:
https://www.paypal.me/stumurray
All Contributions are greatly appreciated!
