This might serve: https://www.youtube.com/watch?v=-nA6wo9PXls
On Tue, Feb 21, 2017 at 6:20 PM, David via CnC-List <cnc-list@cnc-list.com> wrote: > Fred, > > Correct. My shorthand was too short... > > > > Sent from my Verizon 4G LTE smartphone > > > -------- Original message -------- > From: Frederick G Street via CnC-List <cnc-list@cnc-list.com> > Date: 2/20/17 10:53 PM (GMT-05:00) > To: cnc-list@cnc-list.com > Cc: Frederick G Street <f...@postaudio.net> > Subject: Re: Stus-List Autopilot control head > > David — if it’s a ram-based (not wheel-based) system, you’ll need more > than just the control head; you’ll also need the course computer to drive > the ram, along with a heading sensor of some sort. > > Fred Street -- Minneapolis > S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI :^( > > On Feb 20, 2017, at 4:00 PM, David via CnC-List <cnc-list@cnc-list.com> > wrote: > > Any brand. It's an old ram and any old Control head should work? No > networking set. > > > > Sent from my Verizon 4G LTE smartphone > > > -------- Original message -------- > From: Home via CnC-List <cnc-list@cnc-list.com> > Date: 2/20/17 4:19 PM (GMT-05:00) > To: cnc-list@cnc-list.com > Cc: Home <ladoug...@comcast.net> > Subject: Re: Stus-List Autopilot control head > > What brand a model > > Sent from my iPad > > On Feb 20, 2017, at 12:12 PM, David via CnC-List <cnc-list@cnc-list.com> > wrote: > > > Does anybody have a use autopilot control head that they want to sell? > Thanks in advance > > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > >
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
