My go to tools for tight places are the GearWrench 85035 35 Pc MicroDriver Set and the Gearwrench ratcheting wrench sets (SAE and metric).
Not sure if either will fit your situation. Dennis C. On Mon, Mar 27, 2017 at 5:23 PM, Gary Nylander via CnC-List < cnc-list@cnc-list.com> wrote: > Can you get a flat ratchet wrench in there? All you need for swing room is > one click. They have an open end on one end and a box (ratcheting) on the > other. I got mine at Sears, but I’ve seen them at Lowe’s and elsewhere. > > > > Gary > > > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *David > via CnC-List > *Sent:* Monday, March 27, 2017 6:11 PM > *To:* CNC CNC <cnc-list@cnc-list.com> > *Cc:* David <davidrisc...@msn.com> > *Subject:* Stus-List Removing Starter... > > > > So the head is off of the 3QM30 and while everything is apart I am > rebuilding all the peripherals...including the starter. > > > > Access to the starter seemed good. Until it was not. Cannot get a > socket on there and swing room for a box wrench is limited and geometry > awkward. > > > > Aside from cutting a new access port through the quarter berth to get to > the casing bolts is there some trick or specialty tool I have not thought > of? > > > > Thanks in advance > > > > David F. Risch > > 1981 40-2 > > (401) 419-4650 (cell) > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > >
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
