Neil,,
That worked great thanks! David F. Risch (401) 419-4650 (cell) ________________________________ From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of Neil Gallagher via CnC-List <cnc-list@cnc-list.com> Sent: Thursday, April 20, 2017 11:48 PM To: cnc-list@cnc-list.com Cc: Neil Gallagher Subject: Re: Stus-List Yanmar Hand Starting Handle Another approach, if the front pulley is accessible, is to put a deep socket on the nut holding the pulley to the crankshaft, then use a socket wrench or a breaker bar to rotate the engine. Neil Gallagher Weatherly, 35-1 Glen Cove, NY On 4/20/2017 6:17 PM, David via CnC-List wrote: Hello all...trying to source a hand starting handle for my Yanmar 3qm30 so I may adjust my valves when the head goes back on. Tried the net to no avail. Perhaps one of you has an extra one hanging around for purchase (or short-term lease)? Thanks in advance. David F. Risch (401) 419-4650 (cell) _______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated! [https://www.paypalobjects.com/webstatic/paypalme/images/social/pplogo384.png]<https://www.paypal.me/stumurray> Pay Stuart Murray using PayPal.Me<https://www.paypal.me/stumurray> www.paypal.me Go to paypal.me/stumurray and type in the amount. Since it’s PayPal, it's easy and secure. Don’t have a PayPal account? No worries. Getting one is fast and free.
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
