Thanks, Josh (I think). At least I know, now, what has to come off first. It 
seems like it might take some time. 

Al Liles
SV Elendil
C&C 37/40+
Vancouver 


> On Jun 25, 2017, at 8:21 PM, Josh Muckley via CnC-List 
> <cnc-list@cnc-list.com> wrote:
> 
> You pretty much nailed it.  The shower surround comes first.  Then disconnect 
> the water supply and drain hoses.  Remove all the screws followed by the 
> counter top.  I'll warn you that the vent is still set far back and not easy 
> to access even without the counter top.  You may need to make a second access 
> port in one of the cabinets - probably the left most cabinet, righthand side.
> 
> I had a leaking hand hole in the top of mine.  Then I found out that the 
> pickup tube for the pump out had become disconnected and I had to engineer a 
> new system.  While I was there I installed a new tank level monitoring system.
> 
> Josh Muckley
> S/V Sea Hawk
> 1989 C&C 37+
> Solomons, MD
> 
> 
> 
>> On Jun 25, 2017 7:32 PM, "Alan Liles via CnC-List" <cnc-list@cnc-list.com> 
>> wrote:
>> Has anyone on the list had to access their holding tank? My vent is plugged 
>> and I need to access at least one end. There is a small access port in the 
>> top of one of the vanity cupboards but that seems fairly useless as I can't 
>> see much in there and my hands don't really fit. To get to the tank top it 
>> looks like the sink and vanity top have to be removed which also involves 
>> the shower plexiglass and support. Any ideas before I disassemble my entire 
>> head?
>> 
>> Al Liles
>> SV Elendil
>> C&C37/40+
>> Vancouver
>> 
>> 
>> _______________________________________________
>> 
>> This list is supported by the generous donations of our members. If you wish 
>> to make a contribution to offset our costs, please go to:  
>> https://www.paypal.me/stumurray
>> 
>> All Contributions are greatly appreciated!
> _______________________________________________
> 
> This list is supported by the generous donations of our members. If you wish 
> to make a contribution to offset our costs, please go to:  
> https://www.paypal.me/stumurray
> 
> All Contributions are greatly appreciated!
_______________________________________________

This list is supported by the generous donations of our members. If you wish to 
make a contribution to offset our costs, please go to:  
https://www.paypal.me/stumurray

All Contributions are greatly appreciated!

Reply via email to