I already did that on the hull and it sounds good and crisp. The topsides are hard to read because many areas are only 8-12 inches wide and you don't get the same sounds from those spots. The wider flatter sections sounded ok though.
Dan On Sat, Jul 1, 2017 at 11:20 PM, Josh Muckley via CnC-List < cnc-list@cnc-list.com> wrote: > You could take a plastic mallet for yourself and percussion test in key > locations. > > Josh > > On Jul 1, 2017 10:17 PM, "Dan via CnC-List" <cnc-list@cnc-list.com> wrote: > >> Thanks Josh, that's what I suspected. The boat was well cared for and >> installs were all done by pros (I was told) so I should be ok to push ahead >> with the survey and hopefully become an owner like you guys :) >> >> On Sat, Jul 1, 2017 at 11:06 PM, Josh Muckley via CnC-List < >> cnc-list@cnc-list.com> wrote: >> >>> C&C designed solid areas for through-hulls and transducers but any >>> aftermarket stuff may not have been installed in those locations. >>> >>> Josh Muckley >>> S/V Sea Hawk >>> 1989 C&C 37+ >>> Solomons, MD >>> >>> On Jul 1, 2017 10:04 PM, "Dan via CnC-List" <cnc-list@cnc-list.com> >>> wrote: >>> >>> Sorry if this was sent twice - the first time I tried it I was not >>> registered but had no responses... >>> >>> I'm looking at a 1986 C&C 44 to buy. Before I get into paying for a >>> survey to check the core out with a moisture meter I'm wondering if any 44 >>> owners out there have had any problems with wet core? - when you remove >>> through hull fittings is the core isolated with solid glass to prevent >>> egress or can you visibly see the balsa core layer? >>> >>> _______________________________________________ >>> >>> This list is supported by the generous donations of our members. If you >>> wish to make a contribution to offset our costs, please go to: >>> https://www.paypal.me/stumurray >>> >>> All Contributions are greatly appreciated! >>> >>> >>> >>> _______________________________________________ >>> >>> This list is supported by the generous donations of our members. If you >>> wish to make a contribution to offset our costs, please go to: >>> https://www.paypal.me/stumurray >>> >>> All Contributions are greatly appreciated! >>> >>> >> >> _______________________________________________ >> >> This list is supported by the generous donations of our members. If you >> wish to make a contribution to offset our costs, please go to: >> https://www.paypal.me/stumurray >> >> All Contributions are greatly appreciated! >> >> > _______________________________________________ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! > >
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!
