Just for grins, make a nice fillet for the tabbing. Grind back to virgin glass or wood, mix some thickened epoxy, put an epoxy bead around the joint then smooth it into a radius fillet with the backside of a plastic spoon. Let it cure then tab it with some biaxial tape.
For the bead use a syringe or a plastic zip lock bag with a corner cut off (think cake decorating). Dennis C. On Tue, Aug 15, 2017 at 10:35 AM, Chris Hobson via CnC-List < cnc-list@cnc-list.com> wrote: > Thanks for the feedback. I did some snooping and surely it’s a shelf, not > structural. Will tab it with fibreglass and call it a day. > > Chris Hobson > S/V Going > 1980 C&C MKI > Hull 615 > > > _______________________________________________ > > This list is supported by the generous donations of our members. If you > wish to make a contribution to offset our costs, please go to: > https://www.paypal.me/stumurray > > All Contributions are greatly appreciated! >
_______________________________________________ This list is supported by the generous donations of our members. If you wish to make a contribution to offset our costs, please go to: https://www.paypal.me/stumurray All Contributions are greatly appreciated!