Hi Bruce I replaced my fixed ports this past spring and I used 3/8" polycarbonate. It is stronger and more scratch resistant than plexiglass. I purchased it from Curbell plastics Rochester NY
Cheers Brian Brian Donovan 112 Frisbee Hill Rd Hilton NY 14468 (585) 313-1940 > On Nov 18, 2017, at 9:16 AM, Bruce Whitmore via CnC-List > <cnc-list@cnc-list.com> wrote: > > Hello all, > > I am going to replace the plexiglass on my companionway. The sliding part is > easy. However, for the fixed portion forward of slider, it is stuck down to > fiberglass. I am guessing that it was originally installed with Plexus like > the fixed ports on the side were done. > > Can anyone confirm that? > > As for removing the plexi, should I simply tap a few putty knives in between > the plexi and the fiberglass to pop it loose, or do you have a better idea? > > Then seal with VHB tape, correct? This area seems to be about 1 1/2" wide by > comparison to the fixed ports. > > Thanks for the insights! > > Bruce Whitmore > > (847) 404-5092 (mobile) > bwhitm...@sbcglobal.net > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
