I do have a spare 2 blade fixed that was on my C&C 40 that you can try, I suspect it will be a lot closer than what you are using now, and I am in the Shelburne shipyard to get it, my shaft is 1 1/8” the replacement prop is 16 x 11, my 3 hm27 will rev to 3000.
George From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Della Barba, Joe via CnC-List Sent: Monday, December 18, 2017 2:51 PM To: cnc-list@cnc-list.com Cc: Della Barba, Joe <joe.della.ba...@ssa.gov>; Daniel Sheer <dansh...@yahoo.com> Subject: Re: Stus-List Prop pitch Goes to Amazon UK?????????????????? From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Daniel Sheer via CnC-List Sent: Monday, December 18, 2017 2:44 PM To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Cc: Daniel Sheer <dansh...@yahoo.com<mailto:dansh...@yahoo.com>> Subject: Stus-List Prop pitch Try this spreadsheet. http://www.surfbaud.co.uk/wave/ Dan Sheer Pegathy - LF 38 Rock Creek off the Patapsco
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray