Hello all, We have a 1994 C&C 37/40+, and we are replacing the stern and v berth mattress foam and fabric. I have noticed a very small leak which is coming from the starboard pedestal guard foot, where the bolts and wires penetrate the cockpit floor. We have stopped the vast majority of the leak by applying a small layer of aluminum duct tape at the point where the stainless tubing penetrates the stainless foot. There is a hard plastic spacer that fills the gap between the tube & the foot, but it doesn't seem to be made of the proper material to be properly water resistant. So, I expect this leaves us with water coming in under the foot itself, where it is bolted through the floor of the cockpit itself (which is finished with teak).
What would you suggest as to the best way to seal this? The leak we get is coming down over the stern berth, and I sure don't want leaks staining our new fabric! I am thinking about loosening the feet & lifting up the pedestal guard, and applying butyl rubber to the bottom. If that works, great. But, how would I also more permanently stop water ingress due to water finding its way between the tube and the foot? Thanks for your ideas! Bruce Whitmore Bruce Whitmore (847) 404-5092 (mobile) bwhitm...@sbcglobal.net
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
