Hi Fred,
Right now am just installing the wind, speed and depth.
The wind vane package has a small white connections box with a connector bar 
assuming this is for the mast cable to instrument connections. Are there 
special connectors to crimp onto each lead in the cable or do you just strip 
and insert then tighten down the screw?  You can see a small flat plate that 
each screw pushes down as part on the connection mechanism. There isn't any 
documentation regarding wind vane cabling in the i60 or wind vane boxes other 
than spade connections to the back of the i60. 

Thanks 

Paul Saxton
Boomerang
C&C 29 Mk 1
Toronto, ON

Sent from my iPhone

> On Feb 17, 2018, at 10:56 AM, Frederick G Street <f...@postaudio.net> wrote:
> 
> Paul - the installation is fairly straightforward, and the instructions in 
> the manuals are pretty good; what questions in particular do you have?  As 
> Mike mentioned, you may need to get some SeaTalkNG network components, 
> depending on how you need to network things.
> 
> — Fred
> 
> Fred Street -- Minneapolis
> S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI   :^(
> 
>> On Feb 16, 2018, at 7:06 AM, Hoyt, Mike via CnC-List <cnc-list@cnc-list.com> 
>> wrote:
>> 
>> Hi Paul
>> 
>> When we installed the i50/i60 in 2014 we had to buy some networking 
>> components to connect them properly for TWS etc...  These networking pieces 
>> did not come in the system pack with our wind/speed/depth instruments.
>> 
>> Likely Fred can explain what is needed and why.  I am still surprised that 
>> everything needed was not included in the pack
>> 
>> Mike
>> 
>> -----Original Message-----
>> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Paul via 
>> CnC-List
>> Sent: Friday, February 16, 2018 8:30 AM
>> To: cnc-list@cnc-list.com
>> Cc: Paul
>> Subject: Stus-List Raymarine i50 & i60 installation tips?
>> 
>> Hello,
>> Does anyone have tips or suggestions on installation of an i50/i60 system 
>> pack. I'm replacing a DataMarine Link 5000 system. 
>> Thanks
>> 
>> Paul Saxton
>> Boomerang
>> C&C 29 Mk 1
>> Toronto, ON
> 
_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to