Have you tried this site? https://www.fillernecksupply.com/fuel-hose-elbows/
Morgan Ellis SV Meandher 30-2 On Mon, Apr 2, 2018, 12:04 TL ROSS via CnC-List, <cnc-list@cnc-list.com> wrote: > Hi ! I have a 1971 C&C 35 Mk1 with an atomic 4 engine, lying Etobicoke, > (near Toronto). The gas fill hose disintegrated so I am replacing (with > much swearing). The most challenging part is to find a replacement for the > elbow that makes the 90 degree turn from the fill hose into the tank. The > existing piece is a fuel stable soft rubber like material, (5"long, 1.5 > "ID) with MFHL 150 stamped on the outside, and a just barely visible EWCO > written on the inside. It could be the original piece that C+C put in way > back. I have tried a hard plastic replacement without success. There is > very little clearance between the top of the fill tube on the tank and the > underside of the cockpit - I think I do need something flexible that I can > squish over the tube coming in from the side and then down onto it, as this > flexible piece did. But I have not been able to track down a direct > replacement. I've done a bit of searching online but I have not found the > exact piece, nor have any idea if I could ever track something like this > down from an automotive supplier. > > If anyone has experience with this, or tips on finding a replacement, I'd > appreciate your thoughts. Need to get this sorted before launch! > Blasted Auxiliary... > > Thanks > > Tracy Ross > oo...@yahoo.ca > > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
