Hadn't hauled the last two years so I have a rather long list. It's like a refit:
Rewire the mast, changed all lights to LED (mast is out) Replace sheeves and axles Replace upper section of furler Removed all halyards and washed, scrubbed and soaked in Downy to soften them. Replace two halyards, repurpose old ones Paint mast Replace spreader tip protectors Repair two floor boards at home Replace two solar fans Heavy wet sand old bottom paint to change type, paint new Pull chainplates and Repair wet core Replace windows (just finished making templates) Paint deck and paint nonskid areas with Kiwi Grip PoliGlow the topsides Relaunch, step the mast, tune the rig, etc > On April 3, 2018 at 1:16 PM Edd Schillay via CnC-List <cnc-list@cnc-list.com> > wrote: > > Listers, > > Now that April is finally here, I was curious as to what you have planned > for your Spring projects. > > On the Enterprise: > > 1. Remove and service hydraulic autopilot pump > 2. Re-vinyl Starfleet markings > 3. Service Refrigeration > 4. Install new hot water heater > 5. Paint bottom > > … and if you’re down south somewhere and have been in the water and > sailing already, I hate you. > > All the best, > > Edd > > > Edd M. Schillay > Starship Enterprise > C&C 37+ | Sail No: NCC-1701-B > City Island, NY > Starship Enterprise's Captain's Log http://enterpriseb.blogspot.com/ > > > > > > > > > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
