Thanks Josh!
Bruce Whitmore 

Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------From: Josh Muckley via CnC-List 
<cnc-list@cnc-list.com> Date: 5/6/18  6:13 PM  (GMT-05:00) To: C&C List 
<cnc-list@cnc-list.com> Cc: Josh Muckley <muckl...@gmail.com> Subject: Re: 
Stus-List Propane solenoid gets quite hot 
I work with solenoid valves quite a bit at work and can tell you that it is 
very common for them to be hot to touch when energized.  You might be able to 
find an aluminum heat sink if it really concerns you.  I googled the auto 
ignition temperature of propane and it is 851° F, so 170° isn't even close to 
being a problem.
https://www.mouser.com/Mobile/Thermal-Management/Heat-Sinks/_/N-5gg0/

Josh MuckleyS/V Sea Hawk 1989 C&C 37+Solomons, MD
On Sun, May 6, 2018, 12:33 PM Bruce Whitmore via CnC-List 
<cnc-list@cnc-list.com> wrote:
Hello all,
I did a propane leak-down test recently, and in addition to replacing the 
pigtail from a relatively new regulator to the tank, I decided to replace the 
hose to the solenoid, and the solenoid itself (the old one was functioning but 
was quite rusty).
After replacing the solenoid, on energizing it, it became quite hot after a 
while (measuring +/- 170 degrees) which of course got me quite concerned.  

Yet, upon researching the issue, I found this to be quite common, and is a 
function of the solenoid being an electromagnet.  

More information can be found here:
Product Review by Better Marine Services

           Product Review by Better Marine Services  Better Marine Services 
Offers the Best Marine Electrical Service, Mechanical Troubleshooting, Computer 
Systems, ...        
Propane solenoid gets hot - Cruisers & Sailing Forums
           Propane solenoid gets hot - Cruisers & Sailing Forums  I just 
noticed tonight that the solenoid on my propane system was hot to the touch. 
Never checked or noticed but...        
Even the solenoid manufacturer (US Solid) references the fact that the solenoid 
is not designed to be run for more than 8 hours straight and will become hot.
The unit draws about 2 amps of power.
The idea of a switch that is designed as a safety device to control propane 
getting hot just doesn't seem right in my book!
Does anyone have a better solution?  

Yes, I manually turn the tank on & off when leaving the boat...
 Bruce Whitmore

(847) 404-5092 (mobile)
bwhitm...@sbcglobal.net
_______________________________________________



Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray




_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to