Wrap the 3/4 outlet with good 3m electrical tape til larger hose will just slide on. then put a hose clamp on.
Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA. -------- Original message --------From: Eric Frank via CnC-List <cnc-list@cnc-list.com> Date: 7/11/18 14:16 (GMT-08:00) To: cnc-list@cnc-list.com Cc: Eric Frank <efran...@mac.com> Subject: Stus-List where to find a 3/4 to 1 1/8 inch hose adaptor Replacing the small automatic electric bilge pump - selected one with a 3/4 inch output, but old one had 1 1/8 inch. Can’t find a hose adaptor to make the change so I can keep using the old discharge hose. Suggestions welcome. Eric Frank Cat's Paw, C&C 35 Mk II Mattapoisett, MA
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
