Did you cut the hose to get the best fit? Joe From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Gary Nylander via CnC-List Sent: Wednesday, September 05, 2018 4:08 PM To: cnc-list@cnc-list.com Cc: Gary Nylander <gnylan...@atlanticbb.net> Subject: [EXTERNAL] Re: Stus-List C&C 30' mk1 replacement fuel tank
I found that one – by the time you placed it over the Moeller vertical molded in tube, there was not enough room – maybe my shelf is a bit higher than his? Beats me, but I’m done. Gary From: CnC-List <cnc-list-boun...@cnc-list.com<mailto:cnc-list-boun...@cnc-list.com>> On Behalf Of Dennis C. via CnC-List Sent: Wednesday, September 5, 2018 3:05 PM To: CnClist <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> Cc: Dennis C. <capt...@gmail.com<mailto:capt...@gmail.com>> Subject: Re: Stus-List C&C 30' mk1 replacement fuel tank https://www.fillernecksupply.com/1-1-2-id-38mm-90-degree-super-fuel-filler-elbow-1.50/ Dennis C. On Wed, Sep 5, 2018 at 1:41 PM Gary Nylander via CnC-List <cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote: I could not make that fit – how did you bend the input tube? Gary
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
