Caution! Be very careful adding insulation to the bottom of your icebox lid. I added insulation to the bottom of Touche's icebox lid and had to switch beers! Bottled Coronas and Landsharks were too tall to stand up on the grate and allow the lid to close. :(
Solution? I went to store carefully evaluated beer bottles by height. The "official" Touche' beer is now Modelo Especiale. The shorter bottles now allow the lid to close completely. :) Dennis C. Touche' 35-1 #83 Mandeville, LA On Fri, Nov 23, 2018 at 6:31 PM Jim Watts via CnC-List < cnc-list@cnc-list.com> wrote: > The most important place to start is the underside of the icebox top, it's > just raw plywood. The opening lid has some light foam inside the > fiberglass. The outside of the icebox has a couple of inches of urethane > foamed in place. >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray