> Thanx for responding Rob! I think it was one of the listers who claimed that > #1 went to Hinterholler and he himself had the rudder modified for balance. > The only unique feature on Anchovy is a pair of aluminum struts stretching > from the main bulkhead to knees a little aft that the chainplates bolt > to…bulletproof. I’ve seen only one other 30-1 that has this upgrade. She is > indeed stiff! I’ve never had to reef. Good thing too, ‘cause once she gets > the bit in her teeth, there’s no leaving the tiller!
…and thanx Ken for the great article. Rick Bushie Anchovy, 1971 30-1 Tolchester, MD > On Dec 16, 2018, at 12:41 AM, Mike Macdonald <macdonaldmik...@gmail.com> > wrote: > > Got to agree with that Rob. Have a 29 mk1 now and love it but there are times > I miss the 30. Wound say the 25mk1 was also very stable. But a bit wetter > sometimes lol > > Sent from my iPhone > >> On Dec 16, 2018, at 12:37 AM, Rob Ball via CnC-List <cnc-list@cnc-list.com> >> wrote: >> >> Rick, >> The C&C 30 was my first Lines Drawing, but it was Big George telling me what >> to do. >> I don't remember any mods to the rudder, but it indeed was a while ago. >> The design was very much a development of the 27. >> Once we started being able to actual 'compare' the stability of different >> designs- it turns out the 30 is the most stable boat we ever did . . . . . >> Listening to owners over the years, the boat is stable and tough >> (indestructible) and will last forever . . . . . >> >> Cheers, Rob. C&C 34 >> >>> On Dec 15, 2018, at 7:56 PM, rick bushie <rickbushie...@gmail.com> wrote: >>> >>> I see over and over that the 30-1 started life in 1973. We discussed a few >>> years ago that maybe Anchovy was hull #1 due to the hull placard number >>> (30 1 71N) on the inside of her transom. Also, i seem to remember someone >>> mentioning the rudder on #1 being modified ahead of the stock to improve >>> balance. I’m beginning to doubt Anchovy’s pedigree. I need a hug. >>> >>> Rick Bushie >>> Anchovy, 1971 30-1 >>> Tolchester, MD >>>> On Dec 15, 2018, at 12:00 PM, cnc-list-requ...@cnc-list.com wrote: >>>> >>> >>> >>> >> _______________________________________________ >> >> Thanks everyone for supporting this list with your contributions. Each and >> every one is greatly appreciated. If you want to support the list - use >> PayPal to send contribution -- https://www.paypal.me/stumurray >> _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray