John: For electronic items have a look at Digikey.com I've sourced parts from them found them efficient.
$75.00 for a decent quality panel mount buzzer that's waterproof doesn't sound unreasonable to me. A circuit board mountable buzzer element will be cheap, but then you have a project to make it otherwise suitable. Eric On Sun, Jan 13, 2019 at 11:16 AM John and Maryann Read via CnC-List < cnc-list@cnc-list.com> wrote: > Ours has given up the ghost (gee it’s only 37 years old J). Is a Hitachi > WI 1-05 dual purpose for low oil pressure and high temp. 5 pin connector. > 4 pins are used so not quite sure how the wiring would work if went the > Yanmar 3GM engine = type B panel. 2 1/16”hole. Issue is locating one of > these – with the caveat of a reasonable price. Did the Google search. > Found one on flea bay but $75 seems like a lot when can get a single > purpose piezo buzzer for about $15 and just need to change the wiring. > > > > Any suggestions for sourcing or alternative strategy? > > > > John and Maryann > > Legacy III > > 1982 C&C 34 > > Noank, CT > > > > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
