Every C&C I've ever seen had wooden wedges or shaped wooden blocks, up to
as many as eight for larger boats (except a few that had SparTite).

Ken H.

On Thu, 7 Feb 2019 at 08:43, nausetbeach--- via CnC-List <
cnc-list@cnc-list.com> wrote:

> Yes.  Although I lubed the inside of the collar prior to pouring in the
> Spartite, I was so focused on getting the mast in the right position [used
> multiple lines led to snatch blocks and to winches to position the mast] I
> did not notice a small flange on the inside of the collar.  When the yard
> tried to pull the mast several years later, there were starting to lift the
> boat out of the water.  They stopped and called me.  I had to unbolt the
> collar from the boat, and then the mast could be pulled.  Took a couple of
> days to get the collar off the mast.  Then used a Dremel to grind down that
> small flange.  The mast has been pulled 2 times since without issue.  Is
> pretty amazing that little flange was sufficient to hold most of the weight
> of the boat.
>
>
>
> Spartite is a great product, but is pretty much a one and done deal.
> Measure many times and pour onceā€¦
>
>
>
> Brian
>
>
>
> *From:* CnC-List <cnc-list-boun...@cnc-list.com> *On Behalf Of *Rod
> Stright via CnC-List
> *Sent:* Thursday, February 7, 2019 5:41 AM
> *To:* cnc-list@cnc-list.com
> *Cc:* Rod Stright <strig...@eastlink.ca>
> *Subject:* Re: Stus-List Mast Wedge Help
>
>
>
> Anyone have any problem with the Spartite  stick against the mast collar
> when hauling the mast out?
>
>
>
> Rod Stright
>
> Halifax
> _______________________________________________
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to