4 cycle 85 lbs...2 cycle 40.

>From my Android....

________________________________
From: David <davidrisc...@msn.com>
Sent: Thursday, February 21, 2019 2:54:28 PM
To: cnc-list@cnc-list.com
Cc: ALAN BERGEN
Subject: Re: Stus-List Avon and engine...

Yes its definately heavier.   Will weigh when back at house.

>From my Android....

________________________________
From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of ALAN BERGEN via 
CnC-List <cnc-list@cnc-list.com>
Sent: Thursday, February 21, 2019 2:38:19 PM
To: C&C
Cc: ALAN BERGEN
Subject: Re: Stus-List Avon and engine...

Your 4 cycle eight is a lot heavier than your 2 cycle four. Might make the boat 
out of balance.

On Thu, Feb 21, 2019 at 10:48 AM David via CnC-List 
<cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote:
I have a 9' high pressure floor Avon that is in good shap.  My 4hp 2cycle died. 
 I have a barely used 4 cycle mercury 8hp that I would like to throw on it to 
save buying a new boat or motor.  Avon spec plate says max HP is 6 hp.   I am 
thinking that as long as I dont hot-rod  the dink I should be able to get away 
with it?

Or am I missing something...

Thanks in advance.


David F. Risch, J. D.

Gulf Stream Associates, LLC

(401) 419-4650

_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   
https://urldefense.proofpoint.com/v2/url?u=https-3A__www.paypal.me_stumurray&d=DwICAg&c=clK7kQUTWtAVEOVIgvi0NU5BOUHhpN0H8p7CSfnc_gI&r=9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m=MXpC6NFx9UD-3ighdzojkflrixHYtIGwBmABBaul5mI&s=W0WEV3td39oX3GYGANp8XaeshkeJULDA9rKREqG7WcA&e=

_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to