My furler (old Harken) has a hole in the drum and the outer case that line up 
when furled, I just pop a small carabiner through and there's zero chance it 
can un-furl. I just need to remember to remove it before attempting to unfurl.
Your furler may have something similar.

Cheers,
Paul.


________________________________
From: CnC-List <cnc-list-boun...@cnc-list.com> on behalf of bwhitmore via 
CnC-List <cnc-list@cnc-list.com>
Sent: March 15, 2019 4:45 AM
To: cnc-list@cnc-list.com
Cc: bwhitmore
Subject: Re: Stus-List Strange Weather, Eh?

I have seen so many jobs unfurl and shred over the years both in Monroe Harbor 
in Chicago and down here in Florida that I'm surprised that:

1.  yards allow people to store boats with jobs still on the furler;
2.  people haven't learned to safety tie their job when leaving the boat.

Why aren't there more articles about ensuring good jib/genoa safety?

Every time we leave for the weekend or expect winds more than about 20 mph when 
we're on the boat overnight we grab a sail tie and tie it around the jib.

Unwrapped jib tip boats off cradles and tear them off anchors and moorings.

Sheesh...  Just plain good common sense!

Bruce Whitmore
C&C 37/40+ "Astralis"


Sent from Samsung tablet.

-------- Original message --------
From: Richard Bush via CnC-List <cnc-list@cnc-list.com>
Date: 3/14/19 9:44 PM (GMT-05:00)
To: cnc-list@cnc-list.com
Cc: Richard Bush <bushma...@aol.com>
Subject: Re: Stus-List Strange Weather, Eh?

The Colorado storm moved through the Ohio valley tonight: we had some 60+ 
gusts; I saw jibs (not mine) unfurled and shredded in the marina; something I 
have never seen before -here at least!

Richard
s/v Bushmark4: 1985 C&C 37 CB: Ohio River; Mile 506
Richard N. Bush
2950 Breckenridge Lane, Suite Nine
Louisville, Kentucky 40220-1462
502-584-7255


-----Original Message-----
From: Wade Glew via CnC-List <cnc-list@cnc-list.com>
To: cnc-list <cnc-list@cnc-list.com>
Cc: Wade Glew <wadeg...@gmail.com>
Sent: Thu, Mar 14, 2019 8:05 pm
Subject: Re: Stus-List Strange Weather, Eh?

Sunny and hot here in Winnipeg!

Wade Glew
Oh Boy C&C 33 MKII

On Thu, Mar 14, 2019, 13:52 Randy Stafford via CnC-List, 
<cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote:
Yesterday in eastern Colorado we had a bomb cyclone, over land, at about 38 
degrees north latitude.  All-time records were set for lowest atmospheric 
pressure ever recorded in several locations.  The center of the low was at 
about 37.5 degrees north latitude, 102 degrees west longitude, at Manter, 
Kansas just east of the Colorado border.  Category 2 hurricane-strength winds 
were recorded in northeast Colorado while snow was falling, creating a 
snowicane.  The system consisted of a cold air mass moving southeast from 
Canada, swirling with moist warm air moving up from the Gulf of Mexico.  Of 
course that created nasty blizzard conditions in the northwest quadrant of the 
cyclone over the Colorado plains including the Denver metropolitan area.  All 
ground and air travel in eastern Colorado was shut down and is just recovering 
today.  This was a rare meteorological event; I’ve never seen anything like it 
in my lifetime here.

I’ve uploaded a screenshot of http://hint.fm/wind/ taken at about 11:00 MDT 
last night to 
https://drive.google.com/open?id=1biBx_8VUDGuU_GtEgmYIr1nWGhIDFGGq which 
clearly shows the counter-clockwise rotation in the national wind pattern.  
This article 
https://weather.com/safety/winter/news/2019-03-13-bomb-cyclone-winter-storm-ulmer
 describes the details of the bomb cyclone.

Time to go remove snow from by boat again.  I’m so done with this winter 
already.  Good thing I’m doing a BVI charter in two weeks :)

Cheers,
Randy Stafford
S/V Grenadine
C&C 30-1 #7
Ken Caryl, CO
_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --  https://www.paypal.me/stumurray

_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to