Dennis I finally had time to look through your steering documentation; that is 
quality work my friend!  You almost have enough material there to begin a book; 
add some of your other fine upgrades and you are ready to publish!Thank you for 
sharing this.
 
Richard
 1985 C&C 37 CB: Ohio River, Mile 596: 
Richard N. Bush 
2950 Breckenridge Lane, Suite Nine 
Louisville, Kentucky 40220-1462 
502-584-7255 
 
-----Original Message-----
From: Dennis C. via CnC-List <cnc-list@cnc-list.com>
To: CnClist <CnC-List@cnc-list.com>
Cc: Dennis C. <capt...@gmail.com>
Sent: Fri, Apr 26, 2019 8:48 pm
Subject: Stus-List 35-1 Rudder stop upgrade - project documentation

Well, I finally finished the servicing and upgrade to Touche's steering system. 
 Listers may recall this started in January and was interrupted by my month 
long Colorado ski trip.
In summary, to my knowledge, Touche's steering system had never had a major 
maintenance session.  I pulled the pedestal, cables, sheaves, etc. for 
inspection and lubrication.  That's when I found a poor design issue with the 
system.  There were two small bolts installed in the last link on either side 
of the chain.  At full turn of the rudder, these bolts contacted the teeth in 
the pedestal's sprocket acting as a rudder stop.  Over time, the bolts had a 
deleterious effect on the sprocket.  
I would recommend to owners of earlier 35's, and any other older models which 
may have the bolts in the chain, that they inspect the sprocket in their 
pedestal.
I also found a broken strand on one of the steering cables.  This break may 
also have been related to the design issue.
About halfway through the build run of the 35-1's, C&C radically changed the 
rudder stop design by adding a bulkhead aft of the rudder and attaching two 
aluminum plates to the quadrant which contacted the bulkhead at full travel.
I decided to mimic the newer design, eliminating the bolts in the chain.
I can tell you that it is quite a project, not to be taken casually.  I did 
document the project fairly well.  The link to the project document is:
https://drive.google.com/open?id=115qLR3c13N2THCRpsOF-7UGGJBweFXfd

If anyone has any questions, please feel free to contact me.
Dennis C.Touche' 35-1 #83Mandeville, 
LA_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --  https://www.paypal.me/stumurray

_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to