Hi Bruce Shouldn't be cored along the center line. You can tell where there is / isn't core, there is a noticeable step within the inside of the hull where it goes from core to no core. E.G. check around thru-hull fittings, there should be no core in that location so nearby there will be the step in the hull, you'll see what I mean.
Graham Collins Secret Plans C&C 35-III #11 On 2019-05-18 8:25 p.m., bwhitmore via CnC-List wrote: Hello all, I bought a Garmin Echomap Plus 94SV and transducer that is on sale at West Marine. This comes with a good transducer that will map out the bottom, act as a fish finder, etc. On most boats, the transducer can be mounted in the bilge and will fire through the fiberglass sufficiently. We, however, have a cored hull. If worse comes to worst, we get depth data via the existing transducer, but I'd like the added functionality. Does anyone know if there is a spot around the keel where the hull is not cored and it might work? Does anyone have a drawing that shows where the hull is, and is not cored? Thanks! Bruce Whitmore Sent from Samsung tablet. _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
