I have a fixed 16 x 9 two blade that came off my 81 – 40, it does have a 1 1/8th taper I believe,
Will that help? Thanks, George 1981 C&C 40 Burlington, VT From: CnC-List <cnc-list-boun...@cnc-list.com> On Behalf Of schiller via CnC-List Sent: Tuesday, May 28, 2019 7:46 AM To: cnc-list@cnc-list.com Cc: schiller <schil...@bloomingdalecom.net> Subject: Re: Stus-List Anyone have a prop? Chuck, I see from you area codes that you are here in Michigan. Give Torresen Marine a call to see if they might have a used Campbell Sailor or Michigan Wheel prop laying around. We used them to repower our Redwing 35 way back when. Neil Schiller 1983 C&C 35-3, #028, "Grace" Whitehall, Michigan WLYC On 5/27/2019 9:32 PM, Chuck Saur via CnC-List wrote: Hello listers...anyone have a fixed three blade propeller, 16x9 RH for a 1 1/8 shaft? It's for my 37+ who has a problem with the Max Prop that is currently installed. I want to get a quick solution, and use the fixed blade for this year, while I send the MaxProp for reconditioning. Just hoping someone has a fixed prop languishing in their garage and would either sell or loan for a year!!! Anyone help? Boat is out of commission until I secure a solution! Thanks! Chuck Saur Board Chair Olivia's Gift 517 490-5926 Cell 616 977-5766 Fax www.oliviasgift.org<http://www.oliviasgift.org/> [OG logo] _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
