Jeez, Rob, what an incredible font of knowledge you are! We¡re lucky to have you here on the list. Thank you! Andy
Andrew Burton 139 Tuckerman Ave Middletown, RI USA 02842 www.burtonsailing.com http://sites.google.com/site/andrewburtonyachtservices/ +401 965-5260 > On Jul 23, 2019, at 15:19, Rob Ball via CnC-List <cnc-list@cnc-list.com> > wrote: > > There were those three versions of the 37 design, but if you are trying to > figure out actual details, it becomes even more challenging. > I know there were different rig heights - specific to a particular owner - so > they are not all the same . . . > Four different keels will fit on that hull, and were interchangeable when the > boat was originally built. > Different boats got differing amounts of Kevlar in the laminate, and I think > there was two different resins used - again - specific to a particular owner. > In effect, they are custom boats . . . . > > Rob Ball C&C 34 > > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray > _______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray