Like this? https://drive.google.com/open?id=0B_sb5TfIENvsb3lSZzZBdzJuV3c
Installed it to help vent fumes from the alcohol stove. It's a Lewmar. It's either a Size 1 or Size 0. Install wasn't difficult. Trick was to shim the gap between the bulkhead and headliner to get consistent thickness all around. Dennis C. Touche' 35-1 #83 Mandeville, LA On Thu, Aug 29, 2019 at 9:57 AM Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote: > > > My port looking aft form the galley is original 1973 Plexiglas and is a > bit cloudy to say the least! > > I could just cut a new piece, I have it sitting around, and fix it for > free, but I was wondering if there is a modern opening port that fits in > that opening or what the closest size/type would be? > > I think it is the same size as the two forward ports as well. > > Thanks! > > Joe > > Coquina > _______________________________________________ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > >
_______________________________________________ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray