Much better than a large smallmouth bass. Or a Fender Jazz Bass.

Jim Watts
Paradigm Shift
C&C 35 Mk III
Victoria, BC


On Sun, 5 Jan 2020 at 10:53, Bill Coleman via CnC-List <
cnc-list@cnc-list.com> wrote:

> This fall when winterizing, I found a small,  largemouth bass halfway into
> my strainer!
>
>
>
>
>
> Bill Coleman
>
> Erie, PA
>
>
>
>
>
>
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Jack
> Fitzgerald via CnC-List
> *Sent:* Sunday, December 29, 2019 4:31 PM
> *To:* C&CList
> *Cc:* Jack Fitzgerald
> *Subject:* Re: Stus-List Raw Water Blocked
>
>
>
> Tom
>
>
>
> You said: *Alera has a blockage somewhere in the raw water system.  I
> checked the intake and the pump.  Both seem fine But, there seems to be no
> flow at the strainer.*
>
>
>
> You likely have sucked up some trash or possibly a small fish and this
> blocking the raw water intake line between the intake & the strainer. Just
> my 2 cents worth having been there and done that a few times on the 43
> years that we have owned Honey
>
>
>
>
>
> Best regards,
> Jack Fitzgerald
> S/V HONEY - US12788
>
> C&C 39 TM (1974)
> Savannah, GA 31410 USA
>
> This email is protected by the Electronic Communications Privacy
> Act, 18 U.S.C. Sec. 2510-2521, is confidential and may be legally
> privileged.  If you are not the intended recipient, you are hereby notified
> that any retention, dissemination, distribution or copying of this
> communication is strictly prohibited.  Please reply to the sender that you
> have received this message in error, then delete it.  Thank you
>
>
>
>
>
>
>
> On Sun, Dec 29, 2019 at 2:34 PM Stephen Thorne via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
> It’s also possible the exhaust elbow has become corroded.  I had to
> replace one because of same issue.
>
>
>
> Steve Thorne
>
> Deja Vu
>
>
>
> On Sun, Dec 29, 2019 at 1:05 PM John and Maryann Read via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
> Tom
>
> What engine do you have?  Fresh or raw water cooled?   Common issue for
> Yanmar is exhaust riser getting plugged by carbon etc where water enters.
> Will also impact engine performance.  Disconnect hose where enters exhaust
> riser.  If water streams, then you have your answer.  Also check the
> fitting where hose attaches to riser – is clear??  If not, best place is
> check if any blockage at intake or strainer – maybe something got into and
> plugged the hose??  A friend’s hose inlet has less than ideal configuration
> and frequently sucks up eel grass and such and plugs the inlet hose.
> Another culprit might be the pump impeller lost a vane and is stuck in the
> system before the strainer.
>
>
>
> Just some thoughts and good luck
>
>
>
>
>
> John and Maryann
>
> Legacy III
>
> 1982 C&C 34
>
> Noank, CT
>
>
>
>
>
>
>
>
>
>
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Tom
> Buscaglia via CnC-List
> *Sent:* Sunday, December 29, 2019 12:15 PM
> *To:* cnc-list@cnc-list.com
> *Cc:* Tom Buscaglia
> *Subject:* Stus-List Raw Water Blocked
>
>
>
> Alera has a blockage somewhere in the raw water system.  Nothing out the
> exhaust.
>
>
>
>  I checked the intake and the pump.  Both seem fine.  But, there seems to
> be no flow at the strainer.
>
>
>
> I am wondering if there is some maintenance needed for the vented loop?
> It is the next link in the chain and I’m running out of links.
>
> Tom Buscaglia
>
> S/V Alera
>
> 1990 C&C 37+/40
>
> Vashon WA
>
> P 206.463.9200
>
> C 305.409.3660
>
> _______________________________________________
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
> _______________________________________________
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
> _______________________________________________
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to